Národní úložiště šedé literatury Nalezeno 8 záznamů.  Hledání trvalo 0.01 vteřin. 
Component-wise partitioned finite element method in linear wave propagation problems: benchmark tests
Kolman, Radek ; Cho, S.S. ; Červ, Jan ; Park, K.C.
A novel explicit time scheme for nite element computations of wave propagation problems in solids is presented. The presented algorithm, with the component-wise partition of equations of motion to the longitudinal and shear parts, is designed to more precisely integrate wave propagation in accordance with their dierent propagation wave speeds. The suggested three-time step integrator is fully explicit with the diagonal mass matrix, of second-order accuracy, conditionally stable and it exhibits minimal sensitivity behavior on time step size satisfying the stability limit. We present two numerical tests of wave propagation phenomena to show accuracy and performance of the proposed method.
Aerodynamic forces and kinematic properties measured on a fluttering profile
Chládek, Štěpán ; Zolotarev, Igor
The paper describes a possible way of measuring of the kinematic properties and the aerodynamic forces acting on a fluttering profile. The kinematic properties can be measured both using the acceleration and the instant position sensors, both approaches are compared. The aerodynamic forces are not measured directly; their evaluation is based on the static stiffness and the dynamic compliance.
Experimenty se symetrickým profilem pří rychlosti blízké zániku stall-flutteru
Vlček, Václav ; Zolotarev, Igor ; Kozánek, Jan
V aerodynamickém tunelu Ústavu termomechaniky AV ČR byly uskutečněny elastické experimenty s profilem NACA0015 uloženým jako dynamický systém se dvěma stupni volnosti. Pozornost byla soustředěna na chování profilu při rychlostech proudu vzduchu blízkých zániku tzv. stall-flutteru. Rychlostní pole bylo měřeno pomocí Machova-Zehnderova interferometru, interferogramy byly zaznamenány vysokorychlostní kamerou. Byly studovány změny rychlosti na chování profilu.
Experimentální analýza torzních kmitů tvrdých pryží při velkých deformacích
Šulc, Petr ; Pešek, Luděk ; Bula, Vítězslav ; Cibulka, Jan ; Košina, Jan
Tento příspěvek se zabývá novým přístupem dynamického testování tvrdých pryží při velkých deformacích. Experimentální zařízení s řízeným servomotorem bylo navrženo a sestaveno pro torsní přetvoření pryží při předem definovaných amplitudách a frekvencích uhlového kmitání. V tomto článku jsou prezentovány výsledky z prvního testování. Pro fenomenologický popis pryžového chování byl vytvořen matematický reologický model pryže a jeho parametry byly identifikovány porovnáním analytických a experimentálních hysterezních křivek.
Running excitation of blades bunches
Půst, Ladislav ; Pešek, Luděk
Application of additional damping elements or friction connection into blades’ shroud very effectively restricts undesirable vibrations of turbine blades vibrations. The previous investigation of dynamic properties of five-blades-model connected either by a rubber element, by direct Coulomb friction contact or by modified Coulomb friction contact showed very positive results. However, only one type of excitation force vector with one harmonic force acting on the first mass has been used in these studies. Proposed paper will be oriented on the response of the same fiveblades- bunch provided again by means of the same types of dry friction damping connections, but excited by running harmonic force. This type of excitation corresponds better to the real excitation in the steam or gas turbine. Influence of friction forces type, running velocity (depends on ratio of stator and rotor blades numbers), amplitudes of excitation forces, etc. will be analysed and presented.
Testování metody časových diferencí pro torzní kmitání rotující hřídele
Pešek, Luděk ; Bula, Vítězslav ; Cibulka, Jan
Příspěvek je zaměřen na testováním metody časových diferencí při použití signálu enkodéru pro vyhodnocení torzních kmitů rotující hřídele při dynamickém torznim buzení. Přesnost metody byla testována nejprve na numerických simulacích pulzních signálů a nakonec na reálných experimentálních datech získaných z enkodéru. Metoda byla také implementována do řídícího prostředí dSPACE pro on-line zpracování. Dosažené experimentální výsledky jsou v souhlasu s numerickými předpoklady.
Static, spectral and modal analysis of the support of NACA0015 profile
Chládek, Štěpán ; Kozánek, Jan ; Vlček, Václav ; Zolotarev, Igor
In this paper the static and dynamic properties of the new proposed aerodynamical NACA0015 profile were experimentally investigated. The static stiffness of the angular and longitudinal profile support were determined by optical method. By pulse excitation were measured dynamical characteristics for different stiffness and mass configurations and identified corresponding spectral and modal properties. It will be useful for appropriate tuning of this dynamical system to achieve the flutter vibration in aerodynamical tunnel.
Acoustic-structural interaction in human vocal tract prolonged by a tube
Radolf, Vojtěch ; Horáček, Jaromír
Phonation into tubes is often used for voice training and therapy. This paper introduces a mathematical model, which can help to clarify physical background of an influence of the soft tissues of vocal cavities on the acoustic resonances (formant frequencies). Substantial change in the first formant frequency caused by the soft tissues in the human vocal tract is in principle in the acoustic-structural interaction of the acoustic cavity semiocluded by the tube, with the yielding wall created for example by the soft tissues in the larynx.

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.